985
Otsuka Lotec
Model No. 7.5
Otsuka Lotec，「Model No. 7.5」，精鋼自動腕錶，備數字跳時、轉盤式分鐘、秒針，約2025年製。附原裝證書 、錶盒、配件
估價
HK$20,000–40,000
€2,200–4,400
$2,600–5,100
Live May 30, 12:00 PM HKT
製造商
Otsuka Lotec
年份
Circa 2025
錶殼號碼
P75-28135
型號名稱
Model No. 7.5
材料
Stainless steel
機芯
Automatic, Miyota cal. 82S5, 24 jewels
錶帶/ 錶鏈
Leather
錶扣
Stainless steel Otsuka Lotec pin buckle
尺寸
40mm diameter
簽名
Case, dial, movement and buckle signed
配件
Accompanied by Otsuka Lotec warranty stamped Precision Watch Tokyo dated 30th May 2025, instruction manual, cloth, fitted presentation box and outer packaging.
完整圖錄內容
Good to know:
- Model No. 7.5 won the iF Design Award in 2024
- Uses a movement with add-on module developed in collaboration with Precision Watch Tokyo
- In “brand-new” condition with full set of accessories
Otsuka Lotec founder Jiro Katayama is one of the most admired Japanese independent watchmakers. It is noticeable that some of Katayama’s works are influenced by vintage film cameras and cinematography lenses, and this Model 7.5 fully reflects the inspiration from vintage 8mm turret cameras in particular. The three-lens dial set up presenting the jumping hour, rotating minutes and running seconds gives a bold industrial and steampunk appearance to the watch.
The new Model No. 7.5 is a total revamp of the original model. The steel case of the new Model No. 7.5 uses low carbon steel SUS316L, substituting the original SUS303, which provides a high corrosion resistance. The mineral glass of the old model is replaced with sapphire crystal glass, and the fish hour lens indicating the hour has been upgraded to a custom-made sapphire glass as well.
The present watch runs with a Miyota based cal. 82S5 movement. While in most times Otsuka Lotec would attach in-house developed modules on top of the outsourced movements from Miyota, this model houses a movement with a jumping hour module developed in collaboration with Precision Watch Tokyo.
This lot comes with full set of accessories, including the hand-written thank you message card from Jiro Katayama.
- Model No. 7.5 won the iF Design Award in 2024
- Uses a movement with add-on module developed in collaboration with Precision Watch Tokyo
- In “brand-new” condition with full set of accessories
Otsuka Lotec founder Jiro Katayama is one of the most admired Japanese independent watchmakers. It is noticeable that some of Katayama’s works are influenced by vintage film cameras and cinematography lenses, and this Model 7.5 fully reflects the inspiration from vintage 8mm turret cameras in particular. The three-lens dial set up presenting the jumping hour, rotating minutes and running seconds gives a bold industrial and steampunk appearance to the watch.
The new Model No. 7.5 is a total revamp of the original model. The steel case of the new Model No. 7.5 uses low carbon steel SUS316L, substituting the original SUS303, which provides a high corrosion resistance. The mineral glass of the old model is replaced with sapphire crystal glass, and the fish hour lens indicating the hour has been upgraded to a custom-made sapphire glass as well.
The present watch runs with a Miyota based cal. 82S5 movement. While in most times Otsuka Lotec would attach in-house developed modules on top of the outsourced movements from Miyota, this model houses a movement with a jumping hour module developed in collaboration with Precision Watch Tokyo.
This lot comes with full set of accessories, including the hand-written thank you message card from Jiro Katayama.